Select your vehicle

Weigh Safe 10 Inch Drop Hitch with 3 Inch Shank – LTB10-3

Weigh Safe Hitches

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Weigh Safe LTB10-3 drop hitch ball mount, 10 inch drop with 3 inch shank
  • Adjustable ball mount built for the 180 Hitch
  • Aluminum and stainless steel components, 6061 T6 grade
  • Heavy duty design made in the USA
  • UPC 653863202229

Description

Overview

The Weigh Safe LTB10-3 is a 10 inch drop hitch ball mount with a 3 inch shank for the 180 Hitch. It is an adjustable ball mount built from 6061 T6 aluminum and stainless steel components, intended for heavy duty towing.

The 10 inch drop sets the ball lower than the shank, which helps when the tow vehicle sits higher than the trailer. Weigh Safe LLC says its aim is towing peace of mind.

Key features

  • 10 inch drop height
  • 3 inch shank
  • Adjustable ball mount
  • Designed for the 180 Hitch
  • 6061 T6 aluminum and stainless steel construction
  • Heavy duty use
  • Made in the USA

Drop height and clearance

Drop height decides how far the ball sits below the shank, so it has to be chosen with the tow vehicle and trailer heights in mind. Check that the trailer tongue and safety chains clear the mount at full turn and over bumps, and that the trailer rides level once hitched. A mount that sits too low can scrape on dips.

The 3 inch shank carries most of the load, so it should slide into the receiver without play. Use a locking pin rated for the receiver, and inspect the pin holes for wear. Aluminum bodies are light but can show fatigue at stress points, so look for hairline cracks around bends and welds.

  • Check trailer tongue clearance at full turn
  • Use a locking pin in the shank
  • Recheck hardware after the first loaded tow

Specifications

Brand Weigh Safe Hitches
Model LTB10-3
UPC 653863202229
Drop 10 inch
Shank size 3 inch
Material 6061 T6 aluminum and stainless steel
Compatibility 180 Hitch
Origin Made in the USA

Vehicle fitment

The 3 inch shank must match the receiver opening, and the mount is made for the 180 Hitch.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Make sure the 3 inch shank fits your receiver opening before use. Check that the 10 inch drop keeps the trailer level once it is hitched.

What’s included

The mount is the only item covered here. Not included: a hitch receiver and trailer ball, supplied separately.

SKU: W/SLTB10-3 Category:

Specification

Shipping weight 20.00 lbs
Package dimensions 14.00 × 9.30 × 4.30 in
brands

Questions & Answers

Will the Weigh Safe LTB10-3 work with a 3 inch shank receiver?

It works only if the receiver opening is sized to match its 3 inch shank. Measure the opening before fitting the mount, since a mismatch means the mount will not seat properly.

What drop does the Weigh Safe LTB10-3 have?

It has a 10 inch drop, which lowers the ball below the shank. The mount also has a 3 inch shank, a 6061 T6 aluminum and stainless steel build, and is made for the 180 Hitch.

Does the LTB10-3 fit a specific vehicle?

The mount is made for the 180 Hitch, so make sure it suits your vehicle's year, model and trim before ordering. Check the receiver size against the 3 inch shank before use.

Do drop mounts need extra maintenance?

They need regular checks because the drop adds leverage on the shank. Look for loose bolts, cracked welds or worn pin holes, and lubricate moving parts when the design calls for it.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon