Overview
The 54 inch trail jack, part number 2722, is a cast steel jack with a large base and an adjustable connector clamp. It can be used to winch and pull up to 7,000 lbs when a vehicle needs to be moved out of a bind.
The jack is constructed of solid cast steel and finished in a durable powder coat. All of the hardware is zinc plated, and the 54 inch length is the working height listed in the specifications.
Key features
- Solid cast steel construction
- Durable powder coat finish
- Zinc plated hardware
- Large base
- Adjustable connector clamp
- Winch and pull up to 7,000 lbs
Using a trail jack safely
A trail jack can lift a vehicle or work as a pulling tool, and these uses load the jack differently. Set the base on firm, level ground, and keep the lift path straight. Hands and feet should stay clear of the jack’s arm and the strap or line during any lift or pull.
The base is large to help the jack stand on soft ground, though it can still sink into mud or sand. Place a board under the base when the ground is soft. Clean the jack after muddy use and check the powder coat and clamp for chips or wear, since bare metal rusts quickly.
- Keep the connector clamp tight before use
- Use a board or plate under the base on soft ground
- Stop the pull if the jack tilts or the line goes slack suddenly
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2722 |
| UPC | 631410086690 |
| Product type | Trail jack |
| Material | Solid cast steel |
| Finish | Powder coat; zinc plated hardware |
| Height | 54 inches |
| Winch and pull rating | Up to 7,000 lbs |
Vehicle fitment
This trail jack is not tied to a specific vehicle. Check the 7,000 lb winch and pull rating against the vehicle you plan to move before using it.
Confirm the rating against your vehicle and recovery setup before ordering.






















