Overview
The Skyjacker Silver 9000 HD OEM steering stabilizer replacement kit, part number 9008, is a front factory-replacement steering stabilizer with a silver finish and black boot for the 2018 Jeep Wrangler JL, in 2-door and 4-door models.
Steering stabilizers restrain bump steering and front-end vibration. This Silver 9000 series stabilizer is a direct-fit factory replacement for the Wrangler JL, mounted in the front position. It is silver with a black boot and suits owners whose original stabilizer is worn or damaged and who want to keep the standard arrangement. Fit is covered for the 2018 model year, so confirm later model years before ordering.
Key features
- Steering stabilizer, factory replacement
- Silver 9000 series, silver with black boot
- Engineered to restrain bump steering and front-end vibration
- Front position
- Direct fit for the Wrangler JL, 2-door and 4-door
- Fits Wrangler JL models from 2018, with later years to be confirmed before ordering
Replacing a worn stabilizer
A factory replacement stabilizer restores the original damping on the steering linkage, which is the job it has always had. Over time the seals and internal bushings wear, and the steering may start to wander, shake under braking or feel vague at highway speed. Replacing a worn unit with a matching part keeps the front end behaving as the vehicle was designed.
Before swapping the stabilizer, inspect the mounting points, the tie rod ends and the drag link. A new stabilizer cannot correct worn joints, and loose parts can make a fresh unit feel unsteady. Check boot condition as well, since a torn boot lets grit reach the internal seals.
After installation, drive slowly and check the steering through full lock to lock travel before highway speeds. Recheck fasteners after the first few drives, and schedule an alignment so the front wheels track straight.
- Check the tie rod ends for play
- Look for leaks on the damper body
- Confirm full steering travel after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 9008 (also shown as SKY9008) |
| UPC | 803696256689 |
| Product type | OEM steering stabilizer replacement kit |
| Series | Silver 9000 |
| Position | Front |
| Finish | Silver with black boot |
| Body styles | 2 and 4-door |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Skyjacker 9008 covers the 2018 Jeep Wrangler (JL) (Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S). The feature list gives the range as 18-Current Wrangler JL, while the stored fitment list shows 2018.
The 2018 Jeep Wrangler (JL) is covered in the Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Steering components are safety-critical, so professional installation is recommended. Use the correct torque values for your vehicle when tightening fasteners.
- Have the alignment checked after installation.
- Check the steering for binding through full lock to lock travel before driving.
- Re-check fasteners after the first miles of driving.
What’s included
One factory replacement steering stabilizer kit.
Not included: Check the package contents against your installation before starting.









