Overview
The Skyjacker Black MAX steering stabilizer 8400 is a single black replacement stabilizer for the front steering system and a direct fit unit for several older Jeep models. It fits the Jeep Cherokee (XJ), Comanche, Grand Cherokee (ZJ), Wagoneer (SJ) and Wrangler (YJ, TJ and LJ).
A steering stabilizer dampens the shock that road harshness and larger tires send into the steering. The Black MAX line has the same function as the white body stabilizers, in a black body that matches the newer shock line. Replacing a weak stock stabilizer is one upgrade, and adding a second unit creates a dual setup for driver control.
Key features
- Single stabilizer with a black body
- Black shock boot included
- Front position, direct fit
- Replacement series from the Black MAX line
- Dampens steering shock and shimmy from larger tires
- Dual setup suggested by the brand
Installing the front stabilizer
A front steering stabilizer connects to the axle or steering linkage and controls the side-to-side movement that road irregularities produce. Larger tires add weight and change the steering geometry, which makes the front end more sensitive to that movement. Where the stock unit has worn, a replacement restores control and reduces the shimmy that drivers feel through the wheel.
Before fitting the 8400, inspect the front mounts, bushings and tie rod ends, since a loose connection can make a new stabilizer feel ineffective. Brackets and hardware need to match the vehicle’s mounting points, so plan that part before the replacement begins. A dual setup can be built later with a second unit, and the same mount checks apply to both sides of the vehicle.
- Check the mount points before removing the stock unit
- Replace worn bushings alongside the stabilizer
- Recheck fasteners after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 8400 |
| UPC | 803696241609 |
| Product line | Black MAX |
| Series | Replacement |
| Type | Single |
| Position | Front |
| Fitment type | Direct fit |
| Color | Black |
| Shock boot | Black shock boot included |
| Brackets | Not included |
| Hardware | Not included |
Vehicle fitment
Fitment covers 1984-2000 Cherokee (XJ), 1986-1992 Comanche, 1993-1998 Grand Cherokee (ZJ), 1984-1990 Wagoneer (SJ), 2004-2006 Wrangler (LJ), 1997-2006 Wrangler (TJ) and 1987-1995 Wrangler (YJ). Base and Limited trims apply to several models, and Sport applies to the Wrangler TJ and YJ.
Grand Cherokee WJ, Liberty KJ and Wrangler JK models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stabilizer mounts at the front, and both brackets and hardware must be sourced separately. Because it is a steering part, have the steering system inspected after installation.
What’s included
One single black stabilizer with a black shock boot.
Not included: Brackets and hardware.









