Overview
The Skyjacker 7400 is a replacement single steering stabilizer cylinder from the Hydro Series, part number 7400. It has an extended length of 19.6 in. and a collapsed length of 11.8 in., and it is a cylinder only.
Steering stabilizers dampen the shimmy that heavier tires and wheels can cause, and they help control the steering on the highway. Skyjacker describes them as an inexpensive way to reduce driver fatigue when turning on and off the road.
Key features
- Single cylinder, Hydro Series
- 19.6 in. extended length and 11.8 in. collapsed length
- Replacement cylinder only, no hardware included
- Red shock boot included
- Brackets not included
How stabilizer length affects steering
A steering stabilizer works as a hydraulic damper, so its effective travel depends on the length range it operates in. When the cylinder is too short or too long for the mounting points, it can bind at full steering lock or sit with preload that changes the steering feel. Measuring the existing unit first avoids that problem.
Heavier tires and wheels increase the forces that shimmy the front end, so the damper’s condition matters more after an upgrade. Look for oil seepage around the rod, a dented body, or a stabilizer that no longer resists movement. Replace a leaking unit rather than trying to refill it.
- Measure collapsed and extended length with the wheels straight
- Check the mounting ends for wear or bent tabs
- Inspect the shock boot for tears
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 7400 |
| UPC | 803696113913 |
| Single or dual | Single |
| Extended length | 19.6 in. |
| Collapsed length | 11.8 in. |
| Brackets | Not included |
| Hardware | Not included |
| Shock boot | Red |
| Type | Stabilizer only, replacement cylinder |
| Series | Hydro Series |
| Fitment type | Direct Fit |
Vehicle fitment
Match the 11.8 in. collapsed and 19.6 in. extended lengths to your current stabilizer before buying. Confirm the fit against your vehicle’s year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the stabilizer you are replacing, both collapsed and extended, and compare those figures with 11.8 in. and 19.6 in. before ordering. Brackets and hardware are not included, so plan for them separately.
What’s included
A replacement stabilizer cylinder with a red shock boot. Not included: brackets and hardware.









