Overview
The Skyjacker FF25 is a 2.5-inch leveling kit for the front of the 2004 to 2008 Ford F-150. Check your truck’s front spring type before installing it, since the spacer design depends on it.
It raises the front for a level stance and carries a limited lifetime warranty. It is built for the 2004 to 2008 F-150 in several trims.
Key features
- 2.5-inch front leveling lift
- Polyurethane spacer material
- Front lift only, with no rear lift.
- Black finish
- Limited lifetime warranty.
Front leveling and alignment
Front leveling spacers raise the front end by changing how the spring sits or how the strut is supported. Coil springs and struts respond differently to a spacer, so knowing which type your truck uses helps you judge the result. Polyurethane spacers are a common choice because they are firm and resist the heat and oil that can affect other materials.
After installation, the front alignment is the main thing to check. Look for uneven tire wear, a steering wheel that is off center, and rubbing at full lock. Recheck the fasteners after the first few drives, since the new spacers can settle slightly as the truck is used.
- Confirm the spring type before installing
- Check front alignment and steering center
- Recheck fasteners after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FF25 |
| UPC | 803696177816 |
| Lift height | 2.5 inch |
| Front lift method | Strut spacers (specifications); coil spring spacer (short description) |
| Rear lift method | Front lift only |
| Spacer material | Polyurethane |
| Finish color | Black |
| Position | Front |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
The kit fits the 2004 to 2008 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, The 60th Anniversary Edition, XL and XLT trim.
The F-150 models outside 2004 to 2008, and the Super Duty and Ranger trucks, are not on this list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front leveling spacer changes the front ride height, so check the front alignment after the kit is installed and confirm the spacer type matches your springs.
What’s included
The kit is a polyurethane spacer set for the front. Check the hardware and spacer count against your installation before starting.









