Overview
The Rugged Ridge 15100.01 is an 8500lb electric winch for vehicle recovery and off-road pulling, built with a 5.5 HP series wound motor and a 3-stage planetary gearbox with a 172.8:1 gear ratio. It is a Rugged Ridge Performance winch designed to mount on winch bumpers, including the Rugged Ridge XHD Bumper System.
The winch is designed for winch bumpers and is a universal fit, so it is not tied to one make or model. Whether it works on your rig depends on your bumper or mounting plate and its rating for a winch of this size. The 12′ remote solenoid box can be positioned in several ways, and the stainless hardware on the winch body resists rust.
Key features
- 5.5 HP series wound motor for long life and extra pulling power
- 3-stage planetary gear box with a 172.8:1 gear ratio
- Automatic load holding brake system in the drum brake system
- Exclusive light mount roller fairlead for no-drill mounting of up to 2 off road lights
- Tough stainless hardware on the winch body to eliminate rust
- 12′ all weather cable remote solenoid box, mountable over the cable or over the motor
- Limited 5 year warranty against manufacturing defects
Using a winch bumper
A winch bumper carries the winch, the solenoid and often the lights, so the bumper and its mounting points should be checked as a single system. Make sure the bumper is rated for the winch weight and for the pulling forces the vehicle will see during a recovery. Over-riders and frame attachment points matter as much as the bumper face.
The solenoid box can be placed over the cable or over the motor, and the choice affects cable routing and access. Put it where it is easy to reach and out of the rope path. Store the remote so it does not dangle near the drum, and clear debris from the drum area after off-road runs.
- Confirm frame attachment points before fitting
- Choose a solenoid spot that keeps the rope path clear
- Inspect bumper welds and bolts periodically
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15100.01 |
| UPC | 804314217518 |
| Line pull | 8500lb |
| Motor | 5.5 HP series wound |
| Gear ratio | 172.8:1 |
| Gearbox | 3-stage planetary |
| Brake | Automatic load holding brake in the drum brake system |
| Wire rope | 94′ of 5/16 inch diameter wire rope |
| Line type | Cable |
| Fairlead | Roller (light mount) |
| Remote control | 12′ all weather cable remote solenoid box |
| Hardware | Tough stainless hardware on the winch body |
| Warranty | Limited 5 year, against manufacturing defects |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit design for winch bumpers, so vehicle compatibility depends on the bumper. Confirm that your bumper or mounting plate is rated for a winch of this size before installation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The roller fairlead is the part to plan around. It allows no-drill mounting of up to 2 off road lights, so lighting can be added without drilling the winch or the bumper. The remote solenoid box mounts over the cable or over the motor and at several angles to fit the bumper layout. Keep hands and loose clothing clear of the cable and hook whenever the winch is under load.
What’s included
The package includes 94′ of 5/16 inch diameter wire rope, a latched hook, the light mount roller fairlead and a 12′ all weather cable remote solenoid box.
Not included: off road lights, which mount to the roller fairlead.









