Overview
The Omix-Ada 11602.03 is a single replacement fender flare for the front left, or driver side, of the 1987–1995 Jeep Wrangler YJ. It is listed under Omix-Ada part number OAI11602.03 and is an OEM stock replacement, so it returns the flare to its factory shape.
The flare is made of UV-treated thermoplastic that holds up to regular use. It mounts to the factory holes, and the factory hardware can be reused. If that hardware is rusted, some hole modification may be needed.
Omix-Ada offers individual replacements for owners who need only one flare, and this part covers the left side only.
Key features
- Front left (driver side) position
- OEM stock replacement shape
- Reuses the factory mounting hardware
- UV-treated thermoplastic construction
- Single flare, left side only
Caring for the flare
Fender flares sit over the wheel openings and shield the body from rock chips, mud and spray. On a YJ they also set the look of the body lines, so a flare that has cracked, faded or lost its shape is easy to spot. Plastic flares are usually checked at the mounting points first, because road vibration and flexing can loosen fasteners over time.
Before installing, clean the mounting area and check the factory bolts for corrosion. Replace any bolt that is stretched, bent or badly rusted rather than reusing it. After the first few drives, recheck the fasteners and look along the edge of the flare for gaps or rubbing against the tire or fender.
- Inspect fender edges for cracks when washing the vehicle
- Use corrosion-resistant fasteners in rusted holes
- Keep mud from building up under the flare lip
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 11602.03 (also OAI11602.03) |
| UPC | 804314132378 |
| Position | Front left (driver side) |
| Quantity | One flare |
| Material | UV-treated thermoplastic |
| Hardware | Reuse factory hardware |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler YJ, including the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
Wrangler models from 1996 onward, including the TJ and LJ, are not covered. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
Because the flare reuses the factory hardware, inspect the bolts and holes first. Rusted hardware may need hole modification before the flare mounts.
What’s included
One front left replacement fender flare. The factory hardware is used for mounting.








