Overview
The Rugged Radios 1.8-inch Antenna Mount for Horizontal Tube, part number RRPAMH-1.8, is a black billet bar mount for a 1.8-inch horizontal tube. It holds an antenna that uses a 3/8-inch NMO style cable and fits any vehicle with a 1.8-inch horizontal bar.
The mount can be unbolted and moved to a new spot. Its design offers an inline option, which extends the antenna outward from the bar, and a right angle option, which drops the antenna down and away from obstructions such as a roof that tapers over the bar.
Key features
- Billet construction with adjustable positioning
- Two horizontal bar placement choices: inline and right angle
- No welding and no drilling
- Unbolt and move the mount to relocate the antenna
- Black finish
Choosing inline or right angle
The mounting position decides how the antenna clears the vehicle body. An inline position keeps the antenna straight out from the bar, which suits open roofs and clear air. A right angle position drops the antenna down and away from the roof edge, which helps where a tapered roof or a rack would otherwise block it. Test the spot by holding the antenna in place before tightening.
Billet mounts hold their position through vibration when the bolts are tightened evenly, but the threads can loosen over rough trails. Check the fasteners after the first few trips and whenever the antenna moves. Keep the cable routed clear of moving parts, hinges and sharp body edges, and secure it with clips so it does not rub.
- Confirm bar diameter and cable type first
- Hold the antenna in position before tightening
- Re-check bolts after rough trails
Specifications
| Brand | Rugged Radios |
|---|---|
| Part number | RRPAMH-1.8 |
| Bar diameter | 1.8-inch horizontal tube |
| Cable type | 3/8-inch NMO style antenna cables only, not NMO-MT-3/4 |
| Construction | Billet |
| Placement options | Inline or right angle |
| Finish | Black |
Vehicle fitment
No specific vehicle is named for this mount. Fit depends on the bar diameter, which must be 1.8-inch, and on the cable type rather than on year, make or model.
Check your bar and antenna cable before ordering: the mount takes 3/8-inch NMO style cables only.
Installation notes
The mount bolts to the horizontal bar with no welding or drilling. Choose the inline or right angle position before tightening, and unbolt the mount later if you need to move the antenna.
What’s included
The antenna mount itself.
Not included: Antenna and cable.











