Overview
The Omix-ADA Radio Antenna (Black), number 17214.02, is a black replacement radio antenna from Omix-Ada. It is a direct OE replacement for Jeep applications, with a 33-3/4 inch antenna mast that mounts to the driver side front fender.
Key features
- Black powder coat finish
- Fixed antenna design
- It is built to original specifications by Omix-ADA.
- Omix-ADA covers it with a limited five year warranty.
Before you install
A fixed radio antenna relies on a solid mount and a clean ground to receive well. On a fender-mounted antenna, the base sits in a hole that is sealed against water, and the mast is held by a nut inside the fender. Check that the base seats flat and the nut is snug before the mast is tightened. Loose mounts can rattle at speed and let moisture reach the connection, which causes static and dropouts over time.
Before you buy, look at the cable and connector. A mismatched plug or a worn cable can make a new antenna seem faulty. Compare the connector on the cable with the base before ordering, and inspect the old mast for cracks or corrosion. Replacing the cable at the same time is common when the old one is brittle or has been pulled through the body.
- Inspect the base gasket for cracks
- Clean the ground point before reinstalling
- Check the cable connector against the new base
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17214.02 |
| UPC | 804314151812 |
| Color | Black |
| Finish | Black powder coat |
| Antenna type | Fixed |
| Antenna mast length | 33-3/4 inches |
| Mounting location | Driver side front fender |
| Warranty | Limited five year manufacturer warranty |
Vehicle fitment
It mounts to the driver side front fender of a Jeep. Confirm fit for your vehicle’s year, model and trim before ordering, and verify that the mounting location matches your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package contains the antenna itself. Check the contents against your installation before starting.









