Overview
The AMI Stubby Antenna Adapter, part number 6201, is a steel adapter that converts a 5/16 male thread to a 6MM male thread. It works with the AMI antenna part numbers in the compatible list below.
The adapter has a natural steel finish. Compatible AMI antennas include 8821F, 8215F, 8212F, 8209F, 8206F, 5221R, 5215R, 5212R, 5209R, 5206R, 7221R, 7215R, 7212R, 7209, 7206R, 6221P, 6215P, 6209P and 6206P.
Key features
- Converts 5/16 male to 6MM male
- Steel construction with natural finish
- Fits 2 and 4-door models
- Works with a list of AMI antenna part numbers
Mounting and cable care
An antenna adapter sits between the antenna base and the mounting thread, so its fit determines whether the antenna stands straight and seals against moisture. Thread engagement should be firm with no cross-threading. Clean both threads with a dry cloth before assembly, and use a small amount of dielectric grease if the mount is exposed to road salt or wet weather. Matching the thread type on each end prevents the stress that leads to a bent mast.
Antenna cables often fail near the mount because they flex each time the antenna is moved or the vehicle goes through a car wash. Route the cable with a gentle curve and secure it so it does not rub on sharp body edges. Inspect the seal and the base periodically for cracks or corrosion, and replace the adapter if the threads show damage or the antenna wobbles even after careful tightening.
- Tighten by hand before using a tool
- Check for corrosion on both threads
- Route cable away from moving parts
Specifications
| Brand | AMI |
|---|---|
| Part number | 6201 |
| UPC | 660936008169 |
| Thread | 5/16 male to 6MM male |
| Material | Steel |
| Finish | Natural |
| Body style | 2 and 4-door models |
Vehicle fitment
Compatibility is tied to the AMI antenna part number and the 2 and 4-door body style. Confirm your vehicle’s year, model and trim before ordering.
Match your antenna’s part number to the list above before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this adapter only with a compatible AMI antenna. Check that the 5/16 male and 6MM male ends match your antenna and mounting base before assembly.
What’s included
The package is one adapter.









