Overview
The Rubicon Express RE9985 is a front lower right spring cup for the 1997 to 2006 Jeep Wrangler TJ. It is a bracket for mounting a custom axle in the TJ, and welding is required to install it. The part is bare steel.
The brackets are laser cut from 3/16-inch cold rolled steel and then CNC formed.
Key features
- Front lower right position
- Bare steel finish
- Laser cut 3/16-inch cold rolled steel
- CNC formed
- Welding required
Planning a custom axle mount
A custom axle mount depends on accurate measurements and clean welds, because the bracket carries spring loads through the TJ frame. Dry-fit the spring cup before welding so the seat sits square and the spring can be placed without binding. Mark the position on the frame and axle first, then recheck measurements after the bracket is tacked in place.
Bare steel brackets will rust without a coating, so prime and paint the welds and cut edges after installation. Check that the spring cup clears nearby brake lines, the frame rail and the shock mount. Inspect the welds after the first few drives, since a crack at the weld is easier to fix when it is found early.
- Prime and paint bare steel after welding
- Dry-fit the cup before welding
- Mark the spring seat position on the frame
- Inspect welds after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9985 |
| Position | Front lower right |
| Material | 3/16-inch cold rolled steel |
| Finish | Bare steel |
| Installation | Welding required |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997 to 2006 Jeep Wrangler (TJ), in several trims.
The list covers only the TJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required, and the bracket is meant for a custom axle installation in a TJ. Plan the weld and check the mounting position before welding.
What’s included
One front lower right spring cup in bare steel.







