Overview
The Rubicon Express Mono-Tube Shock Absorber, part number RXJ503B, is a gas-charged extreme-duty monotube front shock for a Jeep with a 4-inch lift. It fits the 1987-1995 Jeep Wrangler YJ.
Rubicon describes its extreme-duty monotube shocks as developed and tuned for each application, aiming to give maximum control without sacrificing ride quality, high-speed stability or comfort on long trips over rough terrain.
Key features
- Extreme-duty mono-tube design
- Gas-charged body
- Front position
- Built for a 4-inch lift.
Choosing a YJ shock
A monotube shock uses a single pressure tube with a separate piston, which tends to hold damping steady when the shock gets hot on long runs. On an older YJ the front shocks work against a solid axle and leaf springs, so they see strong loads on washboard roads and during articulation. A gas charge helps resist foaming of the oil at speed.
Before buying, confirm the shock suits the lift height on the vehicle, since a higher setup changes the stroke and length the shock needs. Mounts on YJ front axles often wear, so check bushings and bolts at the same time as the shock. Replacing shocks in pairs keeps the ride and steering balanced from side to side.
- Match the lift height before ordering
- Inspect shock mounts and bushings for wear
- Check that the upper and lower mounts are not bent
- Replace front shocks as a pair
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ503B |
| UPC | 614901451672 |
| Shock series | Extreme-Duty Mono-Tube |
| Position | Front |
| Lift | 4 inch |
| Extended length | 29.1 inches |
| Collapsed length | 17.9 inches |
| Charge | Gas |
| Quantity | Each |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler YJ across its Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
It is designed for the YJ Wrangler generation, so the TJ and JK are not covered here. Confirm your vehicle’s year, model and trim before ordering.




