Overview
The Rough Country rear air spring kit, part number R/C10017, is a set of rear air springs for 2015–2020 Ford F-150 trucks in King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT trims. It is meant for trucks that sit un-level under load, which can happen with a heavy bed load or worn rear leaf springs.
The kit uses two double convoluted air bags with DOT-approved air lines. It provides up to 5,000 lbs of load support, which helps reduce sway and bottoming out when braking and steering. It can also help keep a trailer level and take weight off the tongue. It does not increase towing capacity, and minor drilling is required during installation.
Key features
- Two RC branded double convoluted air bags
- DOT-approved air lines
- 1/4 inch push connector fittings
- All bracketry needed for installation included
- Up to 5,000 lbs of load support
- Limited lifetime replacement warranty against manufacturer defects
Load and ride considerations
Air springs add support when the rear carries more weight than the leaf springs were set up for. They do not change the truck’s rating, so bed load, hitch load and trailer tongue weight still need to stay within the truck’s limits. Ride quality depends on the pressure set for the load, and a rear set too firm can feel harsh when the bed is empty.
Shocks, bump stops and leaf springs all work with air springs, so worn parts can change how the setup feels. When air springs are added, check the shocks for leaks and damage, since the rear may move differently under load. Keep the air lines away from heat and sharp edges, and inspect them periodically for chafing.
- Keep payload and hitch weight within truck ratings
- Inspect shocks and bump stops when adding air springs
- Check air lines for chafing near the frame
- Adjust air pressure to suit the load being carried
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C10017 |
| Product line | Rear air spring kit |
| Position | Rear |
| Air bags | Two double convoluted air bags |
| Load support | Up to 5,000 lbs |
| Air lines | DOT-approved |
| Fittings | 1/4 inch push connector |
| Installation time | Estimated 1 to 2 hours |
| Drilling | Minor drilling required |
| Towing capacity | Not increased by this kit |
| Warranty | Limited lifetime replacement warranty |
Vehicle fitment
It is a direct-fit rear kit for the 2015–2020 Ford F-150 in its King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT trims.
The list covers the 2015 to 2020 F-150 only, so the 2014 and older F-150, the 2021 and newer models and the Super Duty trucks are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes an estimated 1 to 2 hours with standard tools. Minor drilling is required, so check the mounting locations and the air line routing before drilling.
What’s included
Two double convoluted air bags, DOT-approved air lines, 1/4 inch push connector fittings and the bracketry needed for installation.











