Overview
The RockJock RJ-141300-101 (part number R/JRJ-141300-101) is a pair of front brake line relocation brackets for the 2018-2026 Jeep Wrangler JL and the 2020-2026 Jeep Gladiator JT.
RockJock 4×4 takes these brackets from its JL Wrangler and JT Gladiator suspension kits. The stock brake hoses come off the vehicle and bolt to the brackets with the new hardware, and the brackets then bolt to the control arms on the factory studs with the factory nuts.
Key features
- Front brackets, supplied as a pair
- Relocates the stock flex hoses
- Bolt to the control arms on the factory studs
- Uses the factory nuts
- New hardware supplied
Hose clearance and routing
Front brake hoses move with the suspension and the steering, so their routing matters as much as the brackets that hold them. A hose that is too short will pull on its fittings, and one that is too long can rub on the tire, the control arm or the frame. Routing the hose so it has slack through the full range of travel helps it last longer.
Brake line work also calls for care in how the system is handled. Keep the fittings clean and use the correct tools, since a rounded fitting can cause a leak. After the work is complete, check the pedal feel and look for any sign of fluid at the connections before driving the vehicle.
- Check slack at full steering lock
- Watch for rubbing against tires and frame
- Keep fittings clean during the job
- Inspect for leaks after the work
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | R/JRJ-141300-101 |
| Product type | Brake line relocation bracket kit |
| Position | Front |
| Quantity | Pair (2 brackets) |
| Hardware | 2 bolts, 2 washers, 2 nylocs |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2018-2026 Jeep Wrangler (JL), including 2-door Rubicon, Sport and Sport S and 4-door Unlimited Moab, Rubicon, Sahara, Sport and Sport S, and the 2020-2026 Jeep Gladiator.
The JK Wrangler and earlier models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock hoses are unbolted from the vehicle, fastened to the brackets with the supplied bolts, washers and nylocs, and the brackets then go back on the control arm studs with the factory nuts.
What’s included
2 relocation brackets, 2 bolts, 2 washers and 2 nylocs.








