Overview
The Rigid Industries Relay 49024 is a 24 volt relay for completing a 24 volt Rigid installation. It is a genuine Rigid Industries part and works as a universal fit relay with no vehicle tied to it.
It is intended for a 24 volt Rigid lighting setup. Confirm the system voltage before wiring it in.
Matching the relay to your system
A relay is a switch operated by a small control circuit, and in a lighting setup it carries the high current to the lamps. Matching the relay to the system voltage matters most. A 24 volt relay belongs in a 24 volt circuit, and mixing voltages can damage lamps, wiring and switches. Before you start, identify which circuit the relay will serve, and whether it is wired from a switch or a control module.
Good relay practice keeps the connections clean and protected. Mount the relay where it stays dry and away from exhaust heat, and fit it with a fuse on the feed side. Inspect the terminals and connectors when you service the vehicle, and replace any relay that shows scorching or a melted plug. Keeping a spare of the same type is a sensible precaution for trail trips.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 49024 |
| UPC | 815711010732 |
| Voltage | 24 volt |
| Type | Relay |
| Use | Completes a 24 volt Rigid installation |
Vehicle fitment
It is not vehicle-specific: no year, make or model is named, and the relay is tied to the 24 volt Rigid system.
Installation notes
Confirm your Rigid system runs at 24 volts before wiring the relay in.









