Overview
The Rigid Industries Ignite LED Flood Light (part number 20521) is a black, surface-mount auxiliary light with a flood beam pattern. Rigid rates it at 1000 raw lumens in a housing that measures approximately 1.4 x 1.4 x 2 inches, small enough for tight mounting spots.
The Ignite is intended for auxiliary lighting on cars and trucks, motorcycles, UTVs and marine applications where short-range light is needed. Its Go-Pro style mounting bracket mates with standard Go-Pro mounts, which opens up many placement options. Universal fit means no single make, model or year is named, so fit depends on the mounting location and wiring.
Because the housing is so compact, the Ignite suits spots where a larger lamp would not fit. Surface mounting means the light sits on the mounting surface rather than in a cut-out, which avoids the need for a flush opening.
Key features
- Flood beam pattern for short-range auxiliary light
- 1000 raw lumens from a compact housing
- Go-Pro style mounting bracket that mates with standard Go-Pro mounts
- Low minimum voltage of 6-28 VDC
- Current draw of less than 1 amp
- IP68 compliant
- Surface mount with black finish and clear round lens
Mounting a surface light
Surface mounting places the housing on top of the mounting surface, so the bracket carries the load and the surface must be solid. A flat, rigid panel such as a steel bumper section or a sturdy roll bar clamp keeps the light aimed where you set it. Thin panels can flex over rough ground and shift the beam, so choose a spot that resists vibration.
Because the housing is small, it fits places a larger lamp cannot reach, but it can also be easy to overlook. Plan the bracket so the lens sits clear of mud and debris thrown from the tires. After the first few trail runs, recheck the hardware and adjust the aim as needed. A quick bracket check each season helps catch loosening before it becomes a problem.
- Check the surface for flex before drilling
- Leave room behind the housing for cable routing
- Use a fused relay for steady power
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20521 |
| UPC | 849774014888 |
| Beam pattern | Flood |
| Light output | 1000 raw lumens |
| Dimensions | Approximately 1.4 x 1.4 x 2 inches |
| Voltage | 6-28 VDC |
| Current draw | Less than 1 amp |
| Ingress rating | IP68 |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Round |
| Mounting type | Surface |
| Finish | Black |
Vehicle fitment
Universal fit means the light is not built for one vehicle, so the mounting location and wiring decide placement. Choose a spot that suits your vehicle and the power connection you have.
Check that your mounting point has room for the housing and a Go-Pro style bracket, and that the 6-28 VDC input suits your electrical system. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Run power through a fused relay and keep the less than 1 amp current draw in mind when sizing the circuit. Auxiliary lights may be subject to local rules, so check them before fitting on a road vehicle. Use the hardware supplied with the bracket to secure the light.
What’s included
Single light kits include one Ignite light, mounting brackets and related hardware.
Not included: Go-Pro mounts, which must be purchased separately.
























