Overview
The Rigid Industries 2×2 Scene Light in white, part number 681613, is a square LED area light for lighting up a scene. It was developed for first responders and rescue personnel, and it works at a fire scene or a remote pit in Baja. It is universal fit, so it is not built for one make, model or year.
The light uses the latest LED technology in a rugged RIGID branded housing with a thermally optimized heat sink for prolonged, trouble-free use. Rigid describes clear, bright light with minimal amp draw. The white version has a durable UV-resistant powder coat, and Rigid says white lighting suits marine applications and any setup where an alternative to black is wanted.
Key features
- Square 2 inch LED scene light with a white finish
- Up to 115 degrees of horizontal spread for broad coverage
- Thermally optimized heat sink for prolonged use
- Heavy-duty mounting brackets with precise adjustable aiming
- UV-resistant powder coat with an additional chromate conversion coating
- Suited to marine applications
- Minimal amp draw for clear, bright light
Scene lighting on the job
Scene lights are chosen for working areas rather than long distance. A square area light spreads light across a wide zone, which suits work around a vehicle, a campsite or a pit. Think about where the light will be aimed, because a wide spread can shine into the eyes of crew or drivers if it is mounted too high.
The white powder coat keeps the housing looking clean, but coatings still need care. Wash off salt, mud and road film after use, and check for chips where stones may have worn through to bare metal. Corrosion usually starts at those chips, so touch them up promptly.
- Pick a mount that will not flex under load
- Aim at work areas rather than skyward
- Wash salt and mud from the housing
- Touch up chips in the coating
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 681613 |
| UPC | 849774020131 |
| Type | Scene/Area light |
| Light shape | Square |
| Size | 2 inch |
| Bulb type | LED |
| Lens color | White |
| Mounting type | Surface |
| Horizontal spread | Up to 115 degrees |
| Finish | White UV-resistant powder coat with chromate conversion coating |
| Vehicle fitment | Universal fit |
| Packaging | Single |
Vehicle fitment
This scene light is universal fit rather than vehicle-specific. Fit depends on the mounting location and how the light is aimed, so measure the mount position on your own vehicle first.
Confirm your vehicle’s year, model and trim before ordering. No vehicle list is given for this part.
Installation notes
The light needs a power source, so route the wiring through a fuse and a relay and follow local road-use rules before mounting it where other drivers can see it. Set the aim with the adjustable brackets before tightening them fully. Disconnect the battery before working on the wiring.
What’s included
Packaged as a single light with heavy-duty mounting brackets for adjustable aiming.
Not included: A wiring harness and switch need to be sourced separately.









