Overview
The Rigid Industries A-Series LED Light, part number 482083, is a universal accessory light for lighting up dark areas in vehicles and other spaces. Rigid names vehicle cabs, boat cabins, work vehicle beds, under-hood spaces and trunks as typical uses.
Its compact aluminum housing is durable, and the unit is lightweight and waterproof. Several LED colors are offered, and each color is available in high or low power. Mounting uses a rubber flat-mount, a 3M VHB two-way pad, or radius tube-mount adapters that route the wire to the side or bottom.
Key features
- Compact aluminum housing with a durable finish
- Lightweight and waterproof
- Multiple LED colors offered
- High and low power versions
- Flat-mount options: rubber pad and 3M VHB two-way pad
- Radius tube-mount adapters for side or bottom wire exits
Care and inspection
A mounted accessory light is exposed to vibration, weather and cleaning. Inspect the mount after the first few drives or trips, looking for loose fasteners, a lifting adhesive edge or a bracket that has shifted. Tighten fasteners and re-seat the pad if needed, and replace any rubber mount that has cracked or hardened.
Wash the lens with mild soap and water, and avoid harsh solvents that can fog plastic. Dry the housing before storing or refitting. Keep an eye on the wire where it bends at the mount, since that is where chafing usually starts. Repair or re-clip it before it touches a sharp edge.
- Look for loose fasteners and lifting pads
- Replace cracked or hardened rubber mounts
- Watch the wire where it bends at the mount
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 482083 |
| UPC | 849774018763 |
| Product type | A-Series LED accessory light |
| Housing | Compact aluminum |
| Power versions | High and low |
| Mounting | Rubber flat-mount, 3M VHB 2 way pad, radius tube-mount adapters |
| Wire exit | Side or bottom |
| Fitment | Universal Fit |
Vehicle fitment
The A-Series 482083 carries a Universal Fit designation. It is an accessory that is not tied to a vehicle model, so the mounting location and wire route are the things to plan.
Lights mounted in a visible spot may be subject to local rules. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Flat-mount installs use either the rubber pad or the 3M VHB two-way pad, and the radius tube-mount adapters are the option for a side or bottom wire exit. Clean the mounting surface first if you use adhesive. Fuse the feed close to the power source and keep the cable clear of moving parts.
What’s included
The package includes a rubber flat-mount, a 3M VHB 2 way pad for flat mounting and radius tube-mount adapters.
Not included: Check the wiring and power switch needs against your installation before starting.









