Overview
The Rigid Industries E-Series 10 Inch Combo LED Light Bar, part number 110322, is a bracket-mounted LED bar with a combined flood and spot beam. It is sold as a single unit with a clear lens.
The bar is part of the E-Series, a long-running projected LED line. It throws light far on little power and has an extruded aluminum body with a polycarbonate lens sealed against weather. It suits off-road, light truck, race team, farming and emergency vehicle use.
The bar carries universal fit, so mounting position and wiring decide compatibility with your vehicle.
Key features
- Flood and spot combined in one 10 inch bar
- Bracket mounting with a clear lens
- Extruded aluminum housing
- Polycarbonate lens sealed against weather
- Reaches long distances on little power
- Universal fit, with no model year matched
Combo bars and wiring routes
A combo bar puts a wide flood and a focused spot into one housing, which makes it a practical single light for a bumper, roof rack or cab mount. The mounting angle decides how the two parts of the beam land, so tilt the bar to place the flood near the vehicle and let the spot reach out. Consider the bracket height before choosing a spot, because a higher position widens the lit area.
Wiring is the part most often reworked on a combo install. Plan the route before drilling, keep cable away from heat, moving linkage and sharp edges, and use grommets where it passes through metal. Check the bracket and wire after the first few drives, and wipe the lens clean so the flood and spot stay even.
- Tilt to place the flood near the vehicle
- Plan the route before drilling
- Use grommets where wire passes metal
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 110322 |
| UPC | 849774003271 |
| Product type | Light bar |
| Beam | Flood/Spot combo |
| Housing | Extruded aluminum |
| Lens | Polycarbonate, sealed against weather |
| Lens color | Clear |
| Bulb type | LED |
| Mounting type | Bracket |
| Size | 10 inch; listed range 0 to 10 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
The combo bar is universal fit with no model list, so it is not vehicle-specific. Plan a bracket position that suits the 10 inch length and leaves a clean route for the wiring.
Combo optics give a broad pattern and a focused one at once, and the mounting angle decides where each part of the beam falls.
Installation notes
Power the bar through a switch and a fused relay, and route the cable away from moving parts. Confirm the bracket hardware that comes with the bar before drilling.
What’s included
One 10 inch E-Series combo LED light bar, sold as a single unit.
Not included: Check the package contents against your installation before starting. Cabling, a switch and a fuse are not part of this package.









