Overview
The Rigid Industries Cherry Rocker Switch, 3 position, part number 40181, is a lighted switch for Rigid Industries lighting systems. It is a universal accessory, not a vehicle-specific part.
The three positions are ON, OFF and Auto when in Reverse. Measure the switch body and confirm the hole size before drilling.
Key features
- Three positions: ON, OFF, or Auto when in Reverse
- Lighted cherry rocker
- Protective rubber boot
- Universal fit for Rigid lighting systems
Reverse-linked switch wiring
A switch with an Auto position in Reverse usually takes its signal from the reverse circuit, so it turns lights on when the vehicle goes into reverse. Because it depends on another circuit, a fault can come from the switch, the wiring or the reverse signal itself. Testing each one separately makes the cause easier to find.
Start by confirming the switch powers on in its ON position, which tells you the fused supply and ground are working. Then check the reverse signal with a meter while someone shifts into reverse. Clean and tighten connections before replacing any part, since loose contacts are a common cause of intermittent lighting.
- Test ON and OFF before testing Auto
- Check the reverse feed at the switch connector
- Clean ground points before replacing the switch
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40181 |
| UPC | 849774008412 |
| Switch type | Three position cherry rocker |
| Positions | ON, OFF, Auto when in Reverse |
| Lighted | Yes |
| Mounting hole | Not legible in the current copy |
| Fitment | Universal fit |
Vehicle fitment
This switch is a universal fit for Rigid Industries lighting systems and is not tied to a specific vehicle. Match it to the lighting system’s wiring.
Confirm the lighting system and harness before wiring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wire the switch through a fused circuit. Confirm local rules for auxiliary lighting on road-going vehicles before you install it.
What’s included
The package contains one switch.
Not included: the lights, harness and fuse are not covered.









