Overview
The Rigid Industries Lighted Rocker Switch in Red, part number 40191, is a red illuminated rocker switch for Rigid Industries lighting systems. It is a universal accessory, not a vehicle-specific part.
It works with all Rigid Industries wiring harnesses and has a protective rubber boot. Mounting requires a 3/4 inch hole.
Key features
- Lighted rocker for better visibility
- Protective rubber boot
- Red illumination color
- Works with all Rigid Industries wiring harnesses
Wiring an auxiliary switch
A lighted rocker switch is a low-current control, but it still needs a fused circuit so a short cannot damage the harness. Route the switch wiring away from hot components and moving suspension parts, and secure it with strain relief so vibration does not pull on the terminals.
Before drilling, confirm the panel is clear of wiring behind it and that the switch body fits the space. Test the lamp with the harness on the bench, then mount the switch and check the illumination with the lights off and on. Keep spare wire length short so the switch sits tight behind the panel. Label the wires so the circuit is easy to trace later.
- Use a fused circuit as the first wire connected
- Seal the connectors with dielectric grease
- Check the illumination after washing the vehicle
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 40191 |
| UPC | 815711011401 |
| Illumination color | Red |
| Switch type | Rocker |
| Mounting hole | 3/4 inch |
| Water rating | Water resistant rating only; it is not rated waterproof. |
| Fitment | Universal fit |
Vehicle fitment
This is a lighting switch, so it is not tied to a particular vehicle. It is compatible with Rigid Industries lighting systems and wiring harnesses.
Confirm the harness and lighting system match before wiring. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the switch through a 3/4 inch hole. Wire it through a fused circuit, and check local rules for auxiliary lighting on road-going vehicles before installing it.
What’s included
The package contains one switch.
Not included: the lights, the Rigid Industries wiring harness and the fuse are separate items.









