Overview
The Rhino-Rack RVH6 is a high locking flush leg kit supplied as a set of 6 legs for 3 cross bars. Rhino-Rack has refreshed its flush leg range with locking legs that now fit the VA bar extrusion.
The high leg measures 65mm (2.5 inches). The RCP-BK and RTV-BK are the mounts that pair with these legs, so confirm which one suits your setup before choosing this set.
Key features
- High locking leg design
- Fits the VA bar extrusion
- Set of 6 legs for 3 cross bars
- Designed to pair with RCP-BK and RTV-BK mounts
Setting up a multi-bar rack
A three-bar rack multiplies any fit problem, so check each bar before fitting the legs. Measure spacing across the roof so the bars sit level and the load is shared evenly. Uneven spacing can put extra stress on one leg and one mount, which shows up as rattles or movement.
Locking legs suit racks that are set up once and used often, but they still need care. Keep the locking parts free of grit, check for stiffness or play after rough road use, and replace any leg that no longer seats. Because the set covers several bars, a single worn leg is worth replacing before it spreads wear to the rest.
- Measure bar spacing before fitting
- Share the load evenly across the rack
- Keep locking parts clean and free of grit
- Replace any leg that no longer seats fully
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORVH6 |
| Leg type | High locking flush leg |
| Height | 65mm (2.5 inches) |
| Quantity | Set of 6 for 3 cross bars |
| Bar extrusion | VA |
| Fitment | Universal fit |
Vehicle fitment
Match all 3 cross bars to the VA extrusion before buying. Mixed profiles would make the set unsuitable for the rack.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm all 3 cross bars use the VA extrusion before fitting, since the legs are designed for that profile.
What’s included
A set of 6 high locking legs for 3 cross bars.
Not included: The cross bars themselves and the RCP-BK or RTV-BK mounts named as pairings.









