Overview
The Rhino-Rack 2500 Fitting Kit, part number DK079H, is a half kit of replacement pads and clamps for a Rhino-Rack 2500 one bar roof rack. The kit has two santoprene pads and two black steel clamps that attach the rack to the roof. It fits the 2007–2018 Toyota Tundra in the Base, Limited, SR, SR5 and TRD Pro versions.
The kit is a fitting kit, not a roof rack. It does not include cross bars, so the rack bars are a separate purchase, and it is meant for swapping out worn pads and clamps on a 2500 system.
Key features
- Two santoprene pads for the roof contact points
- Two black metal clamps with an anti-corrosive finish
- Black powder coat finish on the steel
- Drilling is not required for installation
Replacing pads and clamps
Roof rack pads and clamps wear with time, especially where they grip the roof through changing weather and road vibration. Worn santoprene can flatten, crack or harden, and a clamp that has lost its finish can start to corrode at the contact point. Replacing these small parts can restore a firm hold on the roof without changing the rack bars.
Before fitting, compare the half kit to the parts already on the rack and make sure the pad shape and clamp size match. Clean the roof contact area and the clamp surfaces so grit does not sit between them. Tighten the clamps evenly and recheck them after the first few drives, since new pads can settle slightly.
- Compare pad shape and clamp size to the existing parts
- Clean the roof contact area before fitting
- Recheck clamp tightness after the first few drives
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | DK079H |
| Part type | Half fitting kit, one bar 2500 system |
| Pads | 2 santoprene |
| Clamps | 2 black metal |
| Material | Steel |
| Finish | Black powder coat |
| Cross bars included | No |
| Installation | Drilling is not required |
| Fitment type | Direct fit |
Vehicle fitment
This half kit fits the 2007–2018 Toyota Tundra in the Base, Limited, SR, SR5 and TRD Pro versions.
Toyota Tacoma and Nissan Frontier models and the Tundra from before 2007 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the half kit matches a one bar 2500 rack before fitting, and use the rack’s own instructions for the final tightening.
What’s included
Two santoprene pads and two black metal clamps.
Not included: cross bars and the rest of the 2500 rack.









