Overview
The Rhino-Rack RTC16 63″ Tracks are 1.6m (63 inch) tracks for mounting accessories to a cap or topper. They are supplied as a pair and come with hardware and end caps.
No vehicle is named for these tracks. Rhino-Rack lists them as universal fit, but they are a cap or topper mount, so the length and your cap’s mounting surface determine whether they suit your setup.
Key features
- 1.6m (63 inch) track length
- Supplied as a pair
- Hardware included
- End caps included
- Designed for cap or topper use
Mounting tracks on a cap
Tracks fitted to a cap or topper carry accessory weight through the cap wall rather than through a vehicle frame, so the mounting surface does most of the work. Check that the cap is sound around each fixing point, and that the wall is not cracked or soft near the edges where the tracks will sit.
A 1.6m track is long enough to span a wide area, so keep the load spread evenly and avoid hanging heavy items at one end. Before drilling, mark positions carefully and check internal clearance for any fittings. After the first long drive, check each fixing and the seal around it, since movement can let water in.
- Check the cap wall near each fixing point
- Spread accessory loads along the track
- Confirm internal clearance before drilling
- Recheck seals and fixings after first use
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORTC16 |
| Length | 1.6m (63 inches) |
| Quantity | Pair |
| Included | Hardware and end caps |
| Fitment | Universal fit |
Vehicle fitment
No vehicle-specific fitment is given. Check that your cap or topper can take a 1.6m track before choosing the set.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of tracks with hardware and end caps.
Not included: The cap or topper the tracks mount to.









