Select your vehicle

Rhino-Rack RVH Leg Kit – RVH2

Rhino-Rack USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rhino-Rack RVH2 high locking flush leg kit for a single cross bar
  • Set of 2 legs, 65mm (2.5 inches) high
  • Fits the VA bar extrusion
  • Universal fit; no specific vehicle named

Description

Overview

The Rhino-Rack RVH2 is a high locking flush leg kit for a single cross bar, supplied as a set of 2 legs. Rhino-Rack has updated its popular flush leg range with a locking design that fits the VA bar extrusion.

The high leg is 65mm (2.5 inches). The RCP-BK for flush bar surface mounts and the RTV-BK for track mounts pair with these legs, so confirm which mount you plan to use before ordering.

Key features

  • High locking leg design
  • Fits the VA bar extrusion
  • Set of 2 legs for a single cross bar
  • Designed to pair with RCP-BK and RTV-BK mounts

Choosing between leg heights

Leg height changes how a rack sits and how much clearance remains under the crossbar, so consider what the load needs. The 65mm high leg gives more space than a low profile, which can help with tall loads, but check it against any roof items or accessories that sit close beneath the bar.

Locking legs are usually replaced in sets, so keep all legs for a bar the same design. Inspect the locking mechanism for wear or stiffness, and clean grit from the channel before fitting. If a leg does not seat smoothly, stop and check the bar profile rather than forcing it, since forcing can damage the extrusion.

  • Match leg height to the load clearance
  • Keep all legs for one bar the same design
  • Clean the channel before fitting
  • Check the locking mechanism for wear

Specifications

Brand Rhino-Rack USA
Part number RHORVH2
Leg type High locking flush leg
Height 65mm (2.5 inches)
Quantity Set of 2 for a single cross bar
Bar extrusion VA
Fitment Universal fit

Vehicle fitment

It is a cross bar mount, so match it to the VA bar extrusion on your cross bar rather than to a make or model.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm your cross bar uses the VA extrusion before fitting, since these legs are designed for that profile.

What’s included

A set of 2 high locking legs for one cross bar.

Not included: The cross bars themselves and the RCP-BK or RTV-BK mounts named as pairings.

SKU: RHORVH2 Categories: , ,

Questions & Answers

What does the RVH2 leg kit fit?

The legs fit the VA bar extrusion and use a locking design. No vehicle is named, so confirm your cross bar uses the VA extrusion before ordering.

How many legs come in the RVH2?

The set covers a single cross bar. For three cross bars, the separate RVH6 kit of 6 legs is the match.

How tall is the high locking leg?

The high locking leg is 65mm (2.5 inches) tall. It is the high version of the flush leg range, and a low version is available as a separate option.

How do I know if my cross bar uses the VA extrusion?

Compare the bar's cross section with the leg's channel, or look for any extrusion marking on the bar. If the profile does not match, the legs will not seat correctly, so do not force them into place.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon