Overview
The Rhino-Rack 2500 Fitting Kit, part number DK174, is a full set of four santoprene pads and four black metal clamps for a Rhino-Rack 2500 two bar roof rack. It fits the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport versions.
The pads are vehicle grade santoprene, and the clamps are strong and anti-corrosive. The kit replaces the pads and clamps that attach the rack to the roof, and it does not include the rack bars.
Key features
- Four vehicle grade santoprene pads
- Four anti-corrosive black metal clamps
- Made to match the Rhino-Rack two bar 2500 system
Checking pads and clamps over time
Roof pads hold the rack bars off the paint and spread the clamp load across the roof. Over time, santoprene can flatten, harden or crack, especially after long periods in strong sun or cold weather. Check each pad for gaps between it and the roof, and look for grit trapped underneath, since grit can scratch the paint each time the rack is moved.
Clamps should be inspected at the same time. Surface rust on black metal clamps is usually the first sign of finish wear, and a clamp that has lost its coating should be replaced before it corrodes further. Re-tighten the fasteners after the first few drives, because pads often settle slightly once the rack has been loaded for the first time.
- Look for flattened or cracked pad edges
- Wipe grit from under each pad before refitting
- Re-tighten fasteners after the first few drives
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | DK174 |
| Part type | Full fitting kit, two bar 2500 system |
| Pads | 4 santoprene |
| Clamps | 4 black metal |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport versions. Confirm fit for your vehicle’s year, model and trim before ordering. The one bar Tacoma kit is the separate DK174F.
Toyota Tundra and Nissan Frontier models are not on this list, and the one bar Tacoma kit (DK174F) is a separate part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the four pads and clamps in their positions on the roof before tightening. Use Rhino-Rack’s installation instructions for the final steps.
What’s included
Four pads of vehicle grade santoprene with four black metal clamps.









