Overview
The Rancho RS999362 is a front RS9000XL Series shock absorber for the 1999–2000 Land Rover Range Rover. It has a 2.75-in. (70mm) body, an 18mm Nitro Carb piston rod and a nitrogen gas charge.
Rancho presents the RS9000XL line as big shocks for big trucks, with a liquid metallic body and fade resistant hydraulic fluid. Pairing with the My Ride 9-position adjustable ride tuner is part of its design.
Key features
- Mounts in the front position
- Works with the My Ride 9-position adjustable ride tuner
- 18mm Nitro Carb piston rod
- Liquid metallic finish
- Polyurethane bushings
- Protective boot included
Front shock service intervals
Front shocks work with steering and braking forces, so their condition affects how the front end tracks and how the tires wear. Over time, fluid can seep past the seals and reduce damping, which often shows up as a floaty or nose-heavy feel. Inspecting the front shock during oil changes or tire rotations helps catch leaks before they affect handling.
Front shocks are usually replaced in pairs so both sides control movement the same way. When the vehicle is lifted or loaded, the front suspension works harder, so check mounts and bushings more often. Tighten the mounting bolts to the specified torque for your vehicle, and recheck them after the first few drives.
- Look for wet shock bodies
- Check the upper mount for play
- Replace bushings that show cracks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999362 |
| Shock series | RS9000XL Series |
| Position | Front |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm Nitro Carb |
| Charge type | Nitrogen gas charged |
| Bushings | Polyurethane |
| Tuning | 9-position, My Ride compatible |
| Finish | Liquid metallic |
| Fluid | Fade resistant hydraulic |
| Lift/drop | 0 in. |
| Fitment type | Direct fit |
| Protective boot | Included |
Vehicle fitment
It fits the 1999–2000 Land Rover Range Rover in Base, Callaway, County, HSE, HSK, S, SE and Vitesse trims.
Range Rover model years before 1999 or after 2000 are not covered, and other Land Rover models are outside its fit. Verify the year, model and trim against your vehicle before ordering this front shock.
Installation notes
The shock is set for stock ride height with 0 in. lift/drop. Compare the mounting points with the original front shock before installing, and check the mounting hardware against your setup.
What’s included
It is a single front unit that comes with a protective boot.
Not included: mounting hardware and the My Ride tuner, a separate system paired with this shock.














