Overview
The Rancho RS999187 is an RS9000XL Series shock absorber with a 2.75-in. (70mm) body, an 18mm chrome rod and nitrogen gas charging. It is a Direct Fit part for Jeep vehicles.
Riders can set one of nine tuning positions by hand or with the remote, choosing a softer setting for pavement or a firmer one for technical terrain. Urethane bushings and a liquid metallic finish complete the shock, and a Limited Lifetime Warranty is noted.
Key features
- 9-position manual or remote tuning
- 2.75-in. (70mm) body diameter
- 18mm chrome rod
- Nitrogen gas charged
- Liquid metallic finish
- Urethane bushings
- Protective boot included
- Limited Lifetime Warranty
Mounting points and bushings
Mounting points transfer every force from the shock into the frame, so their condition matters as much as the shock itself. Urethane bushings are firmer than rubber and pass more road feel through, which some drivers like on trails and others find harsh on pavement. Check that the bushings sit square and are not pinched during installation.
A liquid metallic finish protects the body from light scuffs, but it does not stop damage from rocks or trail debris. Look at the shaft for pitting and at the boot for splits after each season of use. Replacing worn bushings and hardware together keeps the shock performing as it was set up.
- Check bushings sit square during install
- Inspect shaft for pitting
- Replace worn hardware with the shock
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999187 |
| UPC | 10039703091876 |
| Shock series | RS9000XL Series |
| Body diameter | 2.75-in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Bushings | Urethane |
| Warranty | Limited Lifetime Warranty |
| Fitment type | Direct Fit |
Vehicle fitment
Model years and trims are unknown for this shock, so confirm fit against the vehicle you are working on.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether mounting hardware is needed, and compare the mounting points with the shock being replaced.
What’s included
The protective boot comes with the shock. No other parts are named.













