Overview
The Rancho RS999180 is a rear RS9000XL Series shock absorber for 1986 to 1989 Toyota 4Runner, 1989 to 1995 Toyota Pickup and 1995 to 2004 Toyota Tacoma models, as shown on the manufacturer list.
A 2.75-inch (70mm) body, an 18mm chrome rod, a nitrogen gas charge and 9-position myRide tuning define this rear shock. It is rated for zero to one inch of lift. Polyurethane bushings, a liquid metallic finish and a protective boot are included.
Key features
- Rear position for the listed Toyota trucks and 4Runner
- Nine damping positions by hand or with the remote option
- 18mm chrome rod diameter
- 2.75-inch (70mm) body, nitrogen gas charged
- Liquid metallic finish with polyurethane bushings
- Protective boot included
Rear shocks and load
Rear shocks control how the axle moves over bumps and under braking, and they carry more load when the bed or cab is full. A rear shock that has lost damping lets the back end bounce and can make the truck feel light at the rear. Inspect the rubber mounts for splits and check that the eyes move freely without binding.
Rear shocks are often replaced in pairs so both sides damp the same way. When a truck is loaded for towing or hauling, a firmer setting helps control sway, while an empty truck usually rides better with a softer setting. Bump stops and leaf springs also influence rear control, so check them during any shock replacement.
- Look for oil residue on the shock body
- Check rubber eyes for cracks or splitting
- Test by pushing down on each rear corner
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999180 |
| UPC | 10039703091807 |
| Shock series | RS9000XL |
| Position | Rear |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote |
| Charge | Nitrogen gas charged |
| Lift rating | 0 to 1 in. lift |
| Finish | Liquid metallic |
| Bushings | Polyurethane, sometimes called red urethane. |
| Boot | Protective boot included |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
The manufacturer list covers the 1986 to 1989 Toyota 4Runner in DLX and SR5 trim, the 1989 to 1995 Toyota Pickup in DLX and SR5 trim, and the 1995 to 2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trim.
4Runner models from 1990 onward and Tacoma models from 2005 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift rating runs only from zero to one inch, so a Toyota with a taller rear suspension needs a shock rated for its height. Compare the rear mounting ends with the shock you are removing before fitting.
What’s included
One RS999180 rear shock absorber with a protective boot.
Not included: Check mounting hardware against your old shock before starting.














