Overview
The Rancho RS7381 is a rear monotube shock from the RS7000MT Series, a gas-charged shock for 2011–2017 Chevrolet Silverado and GMC Sierra 2500 HD trucks and 2011–2016 Silverado and Sierra 3500 HD trucks. It uses a high-pressure gas-charged monotube design that dissipates heat to reduce fade.
The sensitive damping responds quickly to off-road obstacles, and the shock uses application specific valving. The body is finished in brushed-zinc clear coat, and the build is made in America.
Key features
- Rear position and direct fit for listed 2500 HD and 3500 HD trucks
- Gas charged monotube design with high-pressure gas
- Sensitive damping that reacts instantly to off-road obstacles
- Brushed-zinc clear coated finish on a 2 inch diameter body
- Made in America
Heavy-duty rear shock basics
Heavy-duty pickups carry more weight and often tow, which asks more of the rear shocks than a light-duty truck would face. Under load the shock works harder on compression and rebound, and heat builds during long grades. A gas charged monotube design is meant to manage that heat, but the seals, valving and bushings still take a beating over time.
Before choosing a replacement, check the lift height and mounting style, since fit depends on both. If the truck runs larger tires or a trailer hitch, consider whether the rear suspension may need a matched set of shocks. Inspect the bushings and mounts at each service, and look for oil on the body, cracked boot material or a rear end that keeps bouncing after bumps.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7381 |
| UPC | 10039703005552 |
| Shock series | RS7000MT Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 3 in. or 4 in. lift |
| Shock type | Gas charged monotube |
| Body diameter | 2 in |
| Finish | Brushed-zinc clear coat |
| Made in | America |
Vehicle fitment
It fits 2011–2017 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD, and 2011–2016 Chevrolet Silverado 3500 HD and GMC Sierra 3500 HD. Trims include High Country, LT, LTZ and WT for the Silverado, and Base, Denali, SLE, SLT and WT for the Sierra.
The list does not include 1500 pickups or other model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm you are fitting a rear shock, and check your truck’s lift height against 3 in. or 4 in. lift before ordering. Gas-charged units hold pressure, so leave any servicing to a qualified shop.
What’s included
Check the package contents against your installation before starting.
Not included: Plan for mounting hardware, and confirm it is in the box before installing.












