Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5143

Rancho

Shop Dodge W100 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5143 rear gas-charged shock, RS5000 Series
  • Fits 1961–1971 Dodge W100 and W200 pickups
  • Also fits 1984–1985 Toyota 4Runner and Toyota Pickup
  • Lift rating w/4 in. Lift
  • Red protective boot included

Description

Overview

The Rancho RS5143 is a rear gas-charged shock absorber from the RS5000 Series, with a lift rating of w/4 in. Lift. It is a direct fit for the 1961–1971 Dodge W100 and W200 pickups and the 1984–1985 Toyota 4Runner and Toyota Pickup.

The RS5000 Series is suited to stock and lifted vehicles. This rear unit includes ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston.

Key features

  • Rear position, gas-charged
  • Lift rating w/4 in. Lift
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16mm) diameter piston rod
  • 1 3/8-in. (35mm) diameter piston
  • Red protective boot included

Lift height and older rear shocks

Rear shocks on older pickups and compact SUVs are often asked to work with a raised suspension, and the rating of the shock should be compared with the height of the rear axle. A shock that is too short for a lifted rear can run near the end of its travel and wear its mounts, while one that is too long may reduce control at the bottom of its stroke.

On trucks of this age, rear springs, leaf packs and axle mounts are often worn. Inspecting them when a shock is replaced helps the new unit work the way it was designed to, and prevents the rear from sagging or moving unevenly over rough ground.

  • Measure rear ride height before ordering
  • Inspect leaf springs and spring hangers
  • Check shock eye bushings for wear

Specifications

Brand Rancho
Part number RS5143
UPC 39703514309
Series RS5000 Series
Position Rear
Charge Gas charged
Valving Ten-stage, velocity sensitive
Piston rod diameter 5/8 in. (16 mm)
Piston diameter 1 3/8 in. (35 mm)
Lift rating w/4 in. Lift
Fitment type Direct fit
Warranty Limited lifetime (Rancho)
Quantity Each

Vehicle fitment

The RS5143 fits these vehicles: 1961–1971 Dodge W100 (Pickup Base, Series Base) and W200 (Pickup Base, Series Base) pickups, 1984–1985 Toyota 4Runner (DLX, SR5), and 1984–1985 Toyota Pickup (Base, DLX, DLX Turbo, SR5). Other Dodge W-series years and other 4Runner and Toyota Pickup years are not included. Confirm your vehicle’s year, model and trim before ordering.

Other Dodge W-series years and other 4Runner and Toyota Pickup years are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rating is w/4 in. Lift, and the listed vehicles are older models, so measure your current ride height and confirm the mounting points match before installing the shock.

What’s included

Supplied: one RS5143 rear shock with a red protective boot.

SKU: RANRS5143 Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 24.10 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Dodge W1001961–1971Pickup Base, Series Base
Dodge W2001961–1971Pickup Base, Series Base
Toyota 4Runner1984–1985DLX, SR5
Toyota Pickup1984–1985Base, DLX, DLX Turbo, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS5143 fit a 1985 Toyota 4Runner?

Yes. The 1984–1985 Toyota 4Runner comes in DLX and SR5 trims, so a 1985 model in either trim is covered. Confirm the trim before ordering, since other 4Runner years are not included.

What lift is the RS5143 rated for?

Rancho gives the lift rating as w/4 in. Lift, so it is rated for vehicles with a 4 in. lift. Check your truck's current height before ordering to be sure the rating matches your suspension.

What is the RS5143 part number and UPC?

The part number is RS5143 and the UPC is 39703514309. It is a Rancho RS5000 Series rear shock with ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston.

Can a rear shock be used on a vehicle with a different lift height?

Only if the lift height is within the range the shock is designed for. Measure the current rear ride height and compare it with the rating before fitting. A mismatch can cause bottoming out or poor control.

Why do older rear shocks wear out faster?

Age, dust, road salt and rough use all take a toll on seals and bushings. Older rear shocks often lose damping and develop leaks, so they are worth inspecting when other rear suspension parts are serviced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge W100 Shock Absorbers on Amazon