Overview
Raceline Wheels’ 950B Gauge 20×9 in Satin Black, part number RLW950B-29050-00, is a 20-inch spoke wheel built from aluminum and 9 Inches wide. It uses a 5 on 5 bolt pattern, zero offset, a center bore of 78 and a backspacing of 5.
Because the bolt pattern is 5 on 5, confirm it against the hub before comparing any other measurement. The wheel carries the Universal Fit label and names no vehicle, so measure your existing wheels before deciding.
Key features
- Satin Black finish on a spoke design
- 20 Inches diameter with 9 Inches width
- 5 on 5 bolt pattern
- Offset of 0, backspacing of 5 and center bore of 78
- Part of the 950 Gauge series from Raceline Wheels
Choosing wheels by hub measurements
Wheel size is only part of the decision. A 20-inch wheel with a 9-inch width changes the tire sidewall and how the tire fills the wheel well, so check the overall tire diameter before buying. Start with the hub. The bolt pattern and center bore have to match exactly, because the center bore keeps the wheel centered so the lug nuts do not carry the load alone.
Backspacing and offset decide how the wheel sits against the brake calipers and fenders. Open spoke designs make calipers easier to see during the clearance check. Measure the gap between the back of the wheel and the rotor or caliper with the wheel on the hub, not on the bench.
- Clean rust and debris from the hub face before fitting
- Seat the lug nuts evenly in a star pattern
- Recheck torque after the first short drive
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW950B-29050-00 |
| Series | 950 Gauge |
| Diameter | 20 Inches |
| Width | 9 Inches |
| Bolt pattern | 5 on 5 |
| Offset | 0 |
| Center bore | 78 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment label | Universal Fit |
Vehicle fitment
It carries the Universal Fit label, and no vehicle make, model or year is tied to it. Confirm fit for your vehicle’s year, model and trim before ordering.
Measure the hub bolt pattern and center bore, then compare them with the 5 on 5 pattern and 78 center bore shown here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Zero offset places the mounting face at the wheel centerline, which changes how the wheel sits against the brake and suspension compared with a wheel that has a positive or negative offset. Check brake caliper clearance with the wheel in place before mounting a tire. Confirm the lug seat style matches your lug nuts before torquing.
What’s included
This is one wheel. Plan to source tires, lug nuts and center caps separately if your installation needs them.









