Overview
The Prothane Coil Spring Isolator (part number 19-1706-BL) is a black coil spring isolator. An isolator sits between the coil spring and its mount to reduce noise, wear and vibration at that point, and it can also be used as a spacer when a lift changes the spring position.
Measure the spring seat and the spring diameter before ordering, and match the isolator to the spring and mount. Fit to a specific vehicle depends on those dimensions.
Key features
- Black finish
- Coil spring isolator
- Part number 19-1706-BL
Spring seat and isolator fit
A coil spring isolator sits between the spring and its mount, so it takes the load and the small movements that would otherwise wear metal. Its job is quiet, steady contact, which helps the spring stay where it belongs and reduces the rattle that loose parts make over rough ground.
Fit starts with the spring seat. Check that the seat is clean and flat, that the spring’s coil end sits squarely on the isolator, and that the isolator stays in place once the spring is compressed. An isolator that shifts or sits at an angle can change the spring’s load path.
- Clean the spring seat before installing
- Check that the coil end sits square
- Replace an isolator that is cracked or flattened
Specifications
| Brand | Prothane |
|---|---|
| Part number | 19-1706-BL |
| Color | Black |
| Part type | Coil spring isolator |
Vehicle fitment
No vehicle is named for this isolator, so no fitment is shown.
Measure the spring seat and confirm the isolator size with Prothane before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the isolator sits flat in the spring seat and does not shift when the spring is loaded.
What’s included
One coil spring isolator as titled.









