Overview
The Prothane 18-1118 is a red polyurethane front sway bar bushing kit for a 24 mm sway bar. It fits the 2000 and 2001 Toyota Tundra.
The polyurethane resists oil, road salt, chemicals and ozone or smog, and it does not soften the way worn stock rubber does. The kit replaces worn bushings and gives the front end a more controlled feel.
Key features
- Red polyurethane front sway bar bushings
- 24 mm sway bar size
- Includes sway bar link bushings and sway bar bushings
- Includes metal brackets and a tube of synthetic grease
- The bushings reduce body roll during cornering.
Before you install
Sway bar bushings hold the bar to the frame and let it rotate as the suspension moves. Over time the rubber or urethane can crack, split or wear soft, which shows up as clunks over bumps, wandering on highway curves or extra body lean. When replacing bushings, inspect the bar for surface rust and check the end links, since they often wear at the same time.
Polyurethane stays firmer than rubber, so more road noise and vibration can reach the cabin. Grease the bushing surfaces during assembly, and recheck the bracket bolts after the first few drives to keep the bar seated and the bushings from shifting.
- Check the end links when replacing bushings
- Inspect the bar for rust before reinstalling
- Recheck bracket bolts after initial use
Specifications
| Brand | Prothane |
|---|---|
| Part number | 18-1118 |
| Position | Front |
| Color | Red |
| Material | Polyurethane |
| Sway bar diameter | 24 mm |
Vehicle fitment
This front kit fits the 2000 and 2001 Toyota Tundra.
The list does not include the Tacoma or any Tundra model year after 2001. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes metal brackets along with the bushings, so set the brackets in place and confirm the bar sits centered before tightening the fasteners.
What’s included
Sway bar link bushings, sway bar bushings, metal brackets and a tube of synthetic grease are included.









