Overview
The Energy Suspension 2.18107R is a red Hyper-Flex master bushing kit for the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler Unlimited (LJ). It replaces rubber suspension bushings with performance polyurethane at the control arms, sway bar, end links, track bar and coil spring positions.
Energy Suspension says its polyurethane bushings and bump stops last longer and move more efficiently than original rubber parts. The kit is a direct fit for the Wrangler models named in the vehicle fitment section below.
Key features
- Red polyurethane bushings and bump stops
- Front and rear control arm bushings, two pieces
- Greaseable sway bar and end link bushings, front and rear
- Front and rear track bar set
- Front and rear coil spring isolators
- Direct fit for TJ and LJ Wrangler models
Keeping greaseable bushings working
Greaseable sway bar and end link bushings need periodic lubrication to keep movement smooth and quiet. Polyurethane resists water and road grime better than rubber, but the sliding surfaces still benefit from fresh grease, especially after mud or water crossings. Apply grease through the fittings slowly until fresh material appears at the joint, then wipe away the excess so dirt does not collect around the seal.
Track bar and control arm bushings are greased less often but still deserve inspection. Look for cracks, separation from the metal sleeve, and play when the joint is moved by hand with the vehicle supported. Replacing a worn track bar bushing alongside the rest of the set helps keep the axle centered and steering predictable. Coil spring isolators should also be checked for flattening or cracks while the suspension is apart. Recheck fasteners after the first few trail runs.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.18107R |
| UPC | 703639721789 |
| Color | Red |
| Material | Polyurethane |
| Fitment type | Direct fit |
| Kit contents | Front and rear control arm bushings (2), greaseable sway bar and end link bushings, track bar set, coil spring isolators |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Other Wrangler generations, such as the JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes front and rear control arm bushings (2), front and rear greaseable sway bar and end link bushings, a front and rear track bar set and front and rear coil spring isolators.









