Overview
The Energy Suspension 2.18104R is a red Hyper-Flex polyurethane bushing kit for the 1959–1975 Jeep CJ5 and the 1955–1958 Jeep Willys CJ-5. It includes front and rear spring and shackle bushings, body mounts and tie rod end boots, so the kit addresses several suspension mounting points on these Jeeps.
The Hyper-Flex line is built to improve handling, performance, control and durability. It is designed for control arms, traction bars and leaf springs, and its bushings are made to outlast original rubber parts.
Key features
- Red polyurethane bushings
- Front and rear spring and shackle bushings in one kit
- Body mounts and tie rod end boots included
- Direct fit design.
- Fits the 1959–1975 Jeep CJ5 (Base, Renegade) and 1955–1958 Jeep Willys CJ-5
Choosing and fitting bushings
Polyurethane bushings are stiffer than rubber, which keeps the suspension tighter on the road and transfers more vibration into the cabin. They work best when the mounting points are clean and free of rust, so wire brush the bores and sleeve surfaces before assembly. Many installers also replace the hardware that holds the bushings, since worn bolts can crush a new bushing or allow it to rotate.
Body mounts and tie rod end boots wear more quietly than the rest of the suspension. Check the boots for splits each time the front end is serviced, and look at the mounts for cracks or soft spots in the frame. Plan the job for a day when the truck can stay on stands until the last bolt is torqued.
- Clean bores and sleeve surfaces before pressing
- Replace worn hardware along with the bushings
- Recheck bolt tightness after the first few drives
Specifications
| Brand | Energy Suspension |
|---|---|
| Product line | Hyper-Flex System |
| Part number | 2.18104R |
| UPC | 703639259695 |
| Color | Red |
| Material | Polyurethane |
| Fitment type | Direct fit |
| Included | Front and rear spring and shackle bushings, body mounts, tie rod end boots |
Vehicle fitment
It is a direct fit for the 1959–1975 Jeep CJ5 in the Base and Renegade trims, and for the 1955–1958 Jeep Willys CJ-5.
Other Jeep model years and trims, including CJ-7 and Wrangler, are outside this kit’s coverage. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spring and shackle bushings and body mounts are normally pressed or driven in during a suspension rebuild, which can require removing the spring. Support the vehicle on stands before working underneath it.
What’s included
The kit includes front and rear spring and shackle bushings, body mounts and tie rod end boots. Check the package contents against your installation before starting.









