Overview
The K&N 63-1574 AirCharger snorkel air intake kit is built for the 2007–2011 Jeep Wrangler JK, 2 and 4 door models with the 3.8L engine. It replaces the factory air box and intake housing with a snorkel-fed system that K&N designed for off-road use.
K&N’s goal is lower intake restriction: the aerodynamically engineered tube smooths and straightens airflow so the engine can take in more air than the factory assembly provides. The company links that to more usable power and acceleration across the RPM range and to a guaranteed power gain. Outside air travels through low-restriction snorkel tubing into a roto-molded air box holding a chrome-topped, cone-shaped cotton filter.
Key features
- Snorkel system designed for the Jeep Wrangler to draw air from an ideal location in extreme off-road driving.
- Enclosed roto-molded air box that keeps the filter away from hot engine compartment air.
- Removable air box lid for servicing the washable, reusable cotton filter.
- Intake tube with provisions for the stock intake air temperature sensor and vent (breather) hose.
- Heat shield included to protect the snorkel.
- Cone-shaped filter usable for up to 100,000 miles, depending on driving conditions.
- Covered by the K&N Million Mile Limited Warranty.
Cotton filter maintenance
Cotton filters trap dust well when they are kept clean and oiled to the correct level. Because the filter is washable and reusable, it can be cleaned at regular intervals rather than replaced each time. Cleaning too roughly, though, can tear the cotton or shift the seal.
After washing, let the filter dry completely before oiling it. Look for uneven oil, thin spots or any gap between the filter and the air box lid. A loose fit lets unfiltered air bypass the element, so check the seal every time the lid comes off.
- Wash with a dedicated filter cleaner
- Dry fully before re-oiling
- Check the air box lid seal
- Replace a torn or collapsed filter
- Keep the sensor and vent hoses sealed
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 63-1574 |
| UPC | 24844365019 |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Cotton |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Engine | 3.8L |
| Sensor provisions | Stock intake air temperature sensor and vent (breather) hose |
| Heat shield | Included |
| Filter service interval | Up to 100,000 miles, depending on driving conditions |
| Warranty | K&N Million Mile Limited Warranty |
Vehicle fitment
Fits 2007–2011 Jeep Wrangler (JK) models in the 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X versions.
This kit covers 2007–2011 JK models. Check your vehicle’s year, model and trim before ordering.
Installation notes
The intake tube has provisions to reuse the stock intake air temperature sensor and vent (breather) hose, so keep those factory parts. Installation usually takes 90 minutes or less, using the vehicle’s existing factory mounting points. The kit is not legal for highway use in California or in other states adopting California emission standards, so check local rules before installing it on a road vehicle.
What’s included
The kit includes the roto-molded replacement air box, the cone-shaped washable cotton filter, the snorkel system, the heat shield and the inlet tube.









