Overview
The K&N 71-2582 Blackhawk Air Intake Kit is a cold-air intake for 2011–2016 Ford F-250 Super Duty and F-350 Super Duty trucks in King Ranch, Lariat, Platinum, XL and XLT trims. K&N says its intakes completely replace the factory airflow assembly, including the filter, air box and air path.
The kit uses a partial-enclosure housing and a free-flowing mandrel-bent aluminum tube. It is estimated to add 14 HP and is 50 state legal under CARB Executive Order D-269-48.
Key features
- Free-flowing mandrel-bent aluminum tube
- Partial-enclosure filter housing
- Inlet tube included
- Black, dry filter media that is washable and reusable
- Estimated 14 HP gain.
- 50 state legal with CARB E.O. # D-269-48
- Backed by the K&N Million Mile Warranty
Cleaning and inspecting a dry filter
A dry, reusable air filter performs well only when it is cleaned on schedule and inspected each time it comes out of the housing. Dust that builds up on the media restricts airflow, and a torn or unsealed element lets grit reach the engine. Check the pleats for crushing and the gasket for flattening whenever the air box is opened.
Heavy use on dusty roads calls for more frequent checks than paved driving. Keep the inlet tube clamps snug, since a leak after the filter bypasses it entirely. Inspect the housing for cracks, because a split housing can pull unfiltered air past the element. Let the filter dry fully before it goes back in, and keep a spare clamp on hand for trail trips.
- Inspect the filter after every dusty trip
- Check clamps and tube joints for leaks
- Replace the filter if the media is torn
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 71-2582 |
| UPC | 24844335937 |
| Intake type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Dry, black |
| Inlet tube | Included |
| Estimated gain | 14 HP (K&N estimate) |
| CARB E.O. | D-269-48 (50 state legal) |
| Fitment | Direct fit |
Vehicle fitment
It fits 2011–2016 Ford F-250 Super Duty and F-350 Super Duty trucks in King Ranch, Lariat, Platinum, XL and XLT trims.
F-150 and other Ford pickups are not in this list, and Super Duty trims not named here are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit replaces the factory airflow assembly, including the filter, air box and air path, plan on removing the stock intake components first. K&N estimates most installs take 90 minutes or less.
What’s included
The kit includes the inlet tube, the partial-enclosure housing and the dry air filter.














