Overview
The Icon Suspension 57807CP is a front shock from the V.S. 2.5 Series, sold as a set, for the 1998–2007 Toyota Land Cruiser 100 Series in the Base trim. Icon tunes each V.S. shock to its application in length and damping, and this one is built for a stated lift range of 0 to 3 inches.
The shock uses a remote reservoir design that moves heat away from the damping oil, which Icon links to less fade on extended runs. An externally adjustable CDC valve restricts oil flow into the reservoir and offers 10 compression levels. The shock can be rebuilt and revalved, so it can be serviced rather than replaced.
Key features
- CDC Valve that restricts oil flow into the reservoir, giving 10 levels of compression damping.
- Adjustment is made by turning a knob, with 10 high-resolution settings.
- Bump Zone that increases damping by 20% near full compression.
- Remote reservoir for heat dissipation during prolonged use.
- 6061 aircraft grade aluminum CNC machined components.
- PTFE lined spherical bearings with application specific mounting hardware.
- Premium grade 5WT shock oil, 100% rebuildable and revalveable.
Planning the front upgrade
A front shock upgrade works best when the upper arms, shocks and bump stops are planned together. Changing one component can shift the suspension geometry, so the new parts should be checked as a system. Plan the order of the job before the vehicle comes off the stands, with the arms and fasteners laid out in the sequence they will be installed.
Once the work is finished, the front alignment should be checked. Caster and camber can change when control arms or shock positions change, and a quick alignment helps prevent uneven tire wear. Check brake lines and steering components for clearance through full travel before the vehicle is driven.
- Plan arms, shocks and bump stops together
- Check brake lines for clearance
- Inspect steering components through full travel
- Schedule an alignment after the work
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 57807CP |
| UPC | 70000750533 |
| Product line | V.S. 2.5 Series |
| Position | Front |
| Quantity | Sold as a set |
| Lift range | 0 to 3 inches |
| Compression adjustment | 10 levels (CDC Valve) |
| Shock shaft | 7/8 inch diameter, induction hardened, chrome plated |
| Shock oil | Premium grade 5WT |
| Body | 6061 aircraft grade aluminum CNC machined components |
| Bearings | PTFE lined spherical |
| Bushings and stems | Polyurethane bushings, forged steel mounting stems |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 1998–2007 Toyota Land Cruiser in the Base trim. The shock is a direct fit front unit for that listing, with a stated lift range of 0 to 3 inches.
Earlier Land Cruiser generations and the Land Cruiser 200 Series are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock needs aftermarket uniball upper control arms, which are not part of this set. Install those arms before the shocks, and replace both fronts together. Work with the vehicle on stands and handle the coil springs with care.
What’s included
Two front shocks sold as a set.
Not included: aftermarket uniball upper control arms, which the shock requires.



