Overview
The Pro Comp 55300 is a rigid front track bar bracket that lowers the track bar mounting location at the frame by 3 inches. It keeps the track bar close to its factory operating angle. The bracket is made from 3/16 inch thick steel, MIG welded, and includes grade 8 installation hardware. The finish is gloss black, and it is a front, frame side bracket.
It is designed to work with an adjustable front track bar and a 4 inch drop pitman arm, with the goal of more front suspension travel and less bump steer. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Lowers the track bar mount 3 inches at the frame
- Preserves the factory track bar operating angle
- 3/16 inch thick steel
- MIG welded construction
- Grade 8 installation hardware
- Gloss black finish
- Recommended with an adjustable front track bar and 4 inch drop pitman arm
Drop pitman arm and steering setup
A drop pitman arm lowers the steering linkage to match a lowered track bar, so the two parts are usually set together. If only one changes, the steering geometry can end up off, and the bump steer and steering feel will show it. Set the pitman arm, the track bar and the drag link in a consistent order, and take measurements at each step so the results can be repeated.
Steering work on a lowered mount should be followed by a careful test. Check the steering wheel returns to center after a turn and watch for drift at low speed. Re-check the bolts and the clearance at full lock after the first few drives, since loosened hardware often shows up there first.
- Set the pitman arm and track bar together
- Record measurements at each step
- Check clearance at full lock after install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55300 |
| UPC | 614901114546 |
| Position | Front |
| Mount | Frame side, lowered 3 inches |
| Material | 3/16 inch thick steel |
| Hardware | Grade 8 installation hardware |
| Finish | Gloss black |
| Fitment type | Direct fit (vehicles not named) |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
The bracket is designed to work with a drop pitman arm and an adjustable track bar, so confirm the vehicle and the matching parts before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lowering the track bar mount at the frame changes the bar angle, so the drop pitman arm and the adjustable track bar must be set together. Have the steering geometry checked after the install, and confirm the bar clears the frame at full lock.
What’s included
The frame side bracket comes with its grade 8 installation hardware. The adjustable track bar and drop pitman arm are separate parts, so check the package contents against your installation before starting.









