Overview
The Pro Comp Suspension 55070B is a steering box brace for Jeep steering boxes. It supports the steering box, and the kit includes mounting hardware and instructions.
Key features
- Supports the Jeep steering box
- Mounting hardware included
- Installation instructions included
Steering box support and hardware
A steering box carries steering loads from the column into the linkage, and a brace is one way to keep the box steady when those loads increase. Jeep owners often add a brace after changing tires or height, since the box can move slightly under strain. A brace works best as part of a complete check of the steering system rather than as a stand-alone repair.
Start with the basics. Tighten the mounting hardware in stages so the brace sits flat, then recheck it after the first few drives. Look for rubbing against the steering linkage, pinched hoses or wires, and any sign of movement at the box. Replace any bolt that shows stretching or damaged threads, and keep a note of what was changed for future service.
Steering wear that shows up as play at the wheel, uneven tire wear, or a wandering feel on the road is worth checking before and after the install. Tie rod ends, the pitman arm, and the drag link can all contribute to that feeling, so inspect them as well.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55070B |
| UPC | 614901108521 |
| Application | Jeep steering box |
| Fitment type | Direct fit |
Vehicle fitment
It is designed for Jeep steering boxes. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit comes with instructions, so follow them step by step and confirm the brace clears the steering linkage before tightening the hardware.
What’s included
One steering box brace with mounting hardware and instructions.









