Overview
The Crown Automotive J5355962 is a steering box mounting tie plate for Jeep vehicles without power steering. It fits the CJ5 from 1978 to 1983, the CJ7 from 1978 to 1986 and the Scrambler from 1981 to 1985.
Crown Automotive sells the plate as a direct fit part. The trims for each model appear in the fitment section below.
Key features
- Tie plate for steering box mounting
- Built for steering setups without power steering
- Direct fit for the listed CJ5, CJ7 and Scrambler models.
- Crown Automotive part number J5355962
Manual steering box mounting
A steering box mounting tie plate spreads the load of the steering box across the frame mount. On manual steering setups the box handles the full steering effort without hydraulic assist, so a secure mount matters for steady steering. Plates like this are often replaced when the original has cracked or the holes have elongated.
When fitting a tie plate, confirm the bolt holes line up with the frame and box before final tightening. Inspect the box for leaks, look for loose bolts after a few drives, and check the steering wheel for play. A worn tie rod end or drag link can make the box appear loose, so inspect the whole linkage too. Keep the plate free of rust and check it during routine service.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5355962 |
| UPC | 848399063646 |
| Part type | Steering box mounting tie plate |
| Steering type | Without power steering |
Vehicle fitment
This tie plate fits the following Jeep models:
- CJ5, 1978–1983 (Base, Golden Eagle, Laredo, Limited, Renegade)
- CJ7, 1978–1986 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade)
- Scrambler, 1981–1985 (Base, Laredo, Renegade, SL, SR)
Power steering setups are not covered by this plate. For years outside the ranges above, check year, model and trim against your Jeep before buying.








