Overview
The Mountain Off Road Enterprises SB9037 is a steering box brace for Jeep power steering boxes. It reinforces the steering box mount, which the stock mounting method may not hold securely once larger tires, locking differentials and tough trails are added.
The brace suits owners who have fitted tires larger than stock and want more protection against the steering box being torn off the frame. Year, model and trim ranges are not confirmed for this brace, so check your vehicle details before ordering.
Key features
- Brace for the steering box mount, built from 1 inch O.D. x 120 wall steel tubing
- Powder coated gray finish
- Zinc plated gold clamp
- Designed for power steering boxes only
- All hardware included
Safe installation tips
A steering box brace works on the steering box mount, which carries the load of the steering gear as the wheels turn. Stock mounting relies on factory bolts and brackets that were sized for stock tires, so added weight and force can fatigue them over time. Adding a brace gives the mount another load path, but it does not change how the steering works. Keep expectations focused on the mount and frame rather than steering feel.
Before installation, raise the vehicle safely on stands and inspect the steering box, the frame area and the brace clamp location. Clean the contact surfaces so the hardware seats evenly, and tighten fasteners in stages rather than all at once. After fitting, turn the steering from lock to lock and watch for binding, rubbing against lines or interference with the tie rod. Revisit the fasteners after the first few trail runs, since new hardware often settles.
- Support the vehicle on stands, never on a jack alone
- Check clearance at full lock
- Retorque fasteners after early trail use
Specifications
| Brand | Mountain Off Road Enterprises |
|---|---|
| Part number | SB9037 |
| UPC | 815572022417 |
| Tubing | 1 inch O.D. x 120 wall steel |
| Finish | Powder coated gray |
| Clamp | Zinc plated gold |
| Steering type | Power steering only |
| Included | All hardware |
Vehicle fitment
No vehicle years or models are confirmed for this brace. Confirm your steering box is a power steering type, and look up your Jeep’s steering type before ordering.
The brace is for power steering boxes only, so manual steering boxes are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
All hardware is included with the brace. Before working under the steering box, support the vehicle on stands rather than relying on a jack alone.
What’s included
The steering box brace, the zinc plated gold clamp and all hardware.








