Overview
The Pro Comp 55060B is a steering box brace that supports the steering box on Jeep CJ5 and CJ7 models. It comes with mounting hardware and instructions.
It fits 1976 to 1983 Jeep CJ5 models and 1976 to 1986 Jeep CJ7 models, in the trims covered for those years. Installation uses the included hardware and instructions.
Key features
- Supports the steering box
- Mounting hardware included
- Installation instructions included
- Easy installation.
Steering box and brace wear
The steering box is bolted to the frame and can work loose or crack its mounts over time, especially on older Jeep CJ models that have seen rough trail use. A brace supports the box so the mounting points carry less stress and the steering feels more solid. Bracing does not replace worn steering parts, so inspect the box, pitman arm and linkage for play before fitting.
Look for cracks around the box mounts, loose bolts, and fluid seeping from the box seals. Tighten fasteners to the torque required for your model rather than by feel, and recheck them after the first few drives. When fitting a brace to a CJ, consider whether the frame has been modified, since a shifted mount can change where the brace sits.
- Check the box mounts for cracks
- Tighten bolts to the required torque
- Look for fluid leaks around the box seals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55060B |
| UPC | 614901109054 |
| Type | Steering box brace |
| Hardware | Included |
Vehicle fitment
It fits 1976 to 1983 Jeep CJ5 models and 1976 to 1986 Jeep CJ7 models.
Settle the exact model year and trim of your Jeep before buying, including CJ and Wrangler variants.
Installation notes
Fit the brace with the included mounting hardware and follow the instructions supplied with it. Confirm the brace clears the steering box before tightening the fasteners.
What’s included
One steering box brace, with mounting hardware and instructions.









