Overview
The Pro Comp Suspension 51104 is a stainless steel front skid plate for the differential. Its heavy gauge material is designed to protect the undercarriage without adding unnecessary weight.
It is intended to complement a suspension setup. Installation requires cutting or drilling.
Key features
- Stainless steel finish
- Heavy gauge material
- Differential position
- Front skid type
Mounting a differential skid
A differential skid protects the carrier housing, which sits low on many trucks and is exposed to rocks and stumps. Because this plate is not a bolt-on part, plan the cuts or drill locations carefully and confirm the clearance to driveshafts, brake lines and the axle vent before starting. Measure twice, since a plate that sits too close to moving parts can rub or cause damage.
Check the mounting hardware and the frame or crossmember it bolts to before final tightening. Look for cracks around holes after rough use, and retighten fasteners periodically. Stainless steel handles weather well, but edges created during cutting should be deburred and sealed or coated to limit corrosion. Avoid using the plate as a step or jack point unless the mounts were designed for that load.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51104 |
| UPC | 614901127379 |
| Material | Heavy gauge stainless steel |
| Finish | Stainless steel |
| Position | Differential |
| Type | Front skid |
| Fitment | Direct fit |
| Installation | Cutting or drilling required |
Vehicle fitment
Match your year, model and trim against the plate before ordering, and confirm the mounting position first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required, so this skid is not a bolt-on part. Check the mounting before cutting into the undercarriage.
What’s included
One front differential skid plate.








