Overview
The Pro Comp Single Steering Stabilizer Kit, part number 222512, includes one Pro Comp ES2000 stabilizer shock and all the necessary brackets. It fits the Dodge W300 from 1968 to 1980 and the Dodge Power Wagon base model from 1960 to 1966.
It is for vehicles with a front axle larger than 3 inches.
The Dodge W300 fits from 1968 to 1980, and the Power Wagon base model fits from 1960 to 1966. A front axle larger than 3 inches is the main fitment condition for the kit.
Key features
- One ES2000 stabilizer shock
- All necessary brackets included
- Intended for front axles larger than 3 inches
Axle size and steering damping
A front axle larger than the common size puts different loads on the steering linkage, and that is the reason the kit is aimed at trucks with that axle. Heavier axles often carry larger tires, which increase the force that reaches the tie rods and drag link. A stabilizer shock helps damp that movement when the tires strike bumps.
Older Dodge pickups and Power Wagons have been in service for decades, so the steering joints and frame mounts may be worn. Check tie rod ends, the pitman arm and the steering box before adding damping. Clean the shock mounts, confirm the bolts are tight, and look for cracks in the bracket welds.
- Confirm the front axle size before choosing a kit
- Inspect the shock body for leaks after rough use
- Replace worn joints alongside the stabilizer
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 222512 |
| UPC | 614901031317 |
| Type | Single |
| Series | ES2000 |
| Brackets | Included |
| Shock boot | Not included |
Vehicle fitment
This kit fits these Dodge trucks:
- 1968 to 1980 Dodge W300, base, Custom and pickup models
- 1960 to 1966 Dodge Wm300 Power Wagon base
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES2000 stabilizer shock and all necessary brackets. Not included: the shock boot.








