Overview
The Pro Comp 600010 is a set of polyurethane shock absorber bushings. They are designed to replace stock shock bushings and suit shocks that remain in good condition but have worn or blown-out bushings.
Shock bushings sit at the mounting eyes of a shock and absorb movement between the shock and the bracket. A worn bushing can leave an otherwise usable shock loose at the eye, which is the situation this part addresses. Confirm the eye diameter, bushing style and shock type before ordering.
Key features
- Polyurethane construction
- Designed to replace stock shock bushings
- Suits shocks with worn bushings
Choosing replacement bushings
A shock absorber bushing is a small part with a big job. It keeps the shock’s mounting eye snug against the bracket, so the damper does not knock or wander under load. When the bushing wears, the shock may still control the body, but the play at the eye changes how the suspension feels on rough trails and washboard roads. Replacing the bushing restores that fit without touching the shock body.
When choosing a replacement, match the eye diameter, the bushing style and the sleeve length to the old part. Many shocks share a bushing style across several models, but the eye size is what decides fit. Polyurethane is firmer than rubber, so it transmits more vibration and can feel stiffer on a cold first drive. Keep spare hardware on hand and check the sleeve for cracks at each service.
- Measure the eye before ordering
- Inspect the shock body for leaks
- Check the bracket and mounting bolts for wear
- Grease the bushing bore if the style calls for it
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 600010 |
| Material | Polyurethane |
| Type | Shock absorber bushing |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, and match the bushing to the shock’s eye size and style.
Bushings must match the shock’s eye size and style, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the existing bushing before ordering. Check the shock’s eye diameter and bushing style, and confirm the new bushing seats fully in the eye before reinstalling the shock.
What’s included
The polyurethane shock absorber bushings under part number 600010.
Not included: the shock absorber.








