Overview
Energy Suspension’s 9.8109G is a universal shock eye bushing made from polyurethane, intended for the mounting eye of a shock absorber.
Polyurethane helps shocks work more efficiently and can last a long time. Universal fit means the part is not tied to a vehicle, so the eye size decides whether it matches.
Key features
- Polyurethane shock eye bushing
- Universal fit, no model tie-in
- It can improve shock efficiency.
- Brand says polyurethane lasts a long time
Taking eye measurements
Accurate measurements make the difference between a bushing that seats cleanly and one that rattles or walks out of the eye. Use calipers to check the inside diameter of the eye and the width of the bushing, and note whether the eye is round or worn oval. Measure at more than one point, since wear often shows up on one side first.
Compare your readings with the bushing before installing it. A bushing that is too large will not seat, while one that is too small will allow movement that wears the eye. If the readings are close but not exact, the bushing may still press in, but a snug fit is the goal for long service.
- Measure the inside diameter at several points
- Note whether the eye is round or oval
- Compare readings before pressing in the bushing
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 9.8109G |
| UPC | 703639414421 |
| Material | Polyurethane |
| Fitment | Universal fit |
Vehicle fitment
Universal fit is the only fitment for the 9.8109G. No vehicle years or chassis codes apply, so measure your shock’s eye and compare it with the bushing before use.
Before ordering, check fit for your vehicle’s year, model and trim. Measure the mounting eye of your shock as well.
What’s included
Confirm the package quantity and hardware against your installation before starting.









