Overview
The Pro Comp rear add-a-leaf kit (part 13122) is a pair of short leaves for rear leaf springs. Pro Comp says add-a-leaf kits are the solution when 1.5 to 2.5 inches of raised height is required.
The added leaf also strengthens an existing leaf spring pack, which Pro Comp says helps when a spring needs renewing because of age and heavy loads.
Key features
- Sold as a pair
- Short leaf length
- 1.5 to 2.5 inches of lift
- Strengthens an existing leaf spring pack
Choosing lift and load
Add-a-leaf kits add height by placing an extra leaf into the existing spring pack. The added leaf also adds stiffness, so the spring carries more load before it sags. Because the leaves are short, they sit on top of the existing pack rather than replacing the full spring.
Before choosing a kit, consider how much height you need and how the vehicle is loaded. Extra lift changes driveline angles and can affect steering geometry, so the shackles, brake lines and driveshaft may need checking after the change. Replacing worn bushings and shackles at the same time keeps the new leaves properly aligned.
Leaf spring packs wear with age, and sagging springs often show uneven ride height or a rear end that sits lower on one side. Inspect the leaves for cracks, broken ends and rust between leaves. Re-torque U-bolts after the first few drives, as the spring settles into place.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 13122 |
| UPC | 61490114008 |
| Position | Rear |
| Leaf length | Short |
| Lift height | 1.5 to 2.5 inches |
| Sold as | Pair |
| Fit | Direct fit |
Vehicle fitment
It is a direct fit. Confirm your vehicle’s year, model and trim, and check your existing leaf springs before ordering.
Installation notes
Because the kit raises the vehicle, check alignment and driveline angles after installation.
What’s included
A pair of short add-a-leaf leaves. Check the package contents against your installation before starting, including whether clamps or other hardware are needed.














